Posts Tagged ‘Plasma Monitor’
VideoSecu Tilt Swing Arm Wall Mount for LCD Plasma TV Flat Panel Television ML423 1GA
VideoSecu Tilt Swing Arm Wall Mount for LCD Plasma TV Flat Panel Television ML423 1GA
The Wall Mount is ideal for obtaining side-to side rotation and upward/downward tilt. It supports LCD screens up to 44 lbs. Compatible with screens that have VESA 50mm/75mm/100mm/200mmx100mm mounting hole patterns. Arm extends from wall up to 17.7″ or folds flat to save space. The two arm assembly allows the full articulation of the monitor/keyboard, folds up to 3″ from the wall and extends 17.7″ to the center mounting of the monitor. This mount has two articulating joints which together provide 180 degrees of movement. How to check whether this mount fits your LCD? Please check the weight of your TV or LCD, it must be less than 44 lbs. If your LCD Monitor or TV has 4 or 6 holes on the back of the screen, and they are either 50 x 50 mm (2″ x 2″), 75 x 75 mm (3″ X 3″) or 100×100 mm (4″ x 4″), 200×100mm (8″ x 4 “), or 200×200 (8″ x 8″) apart from each other horizontally or vertically, this bracket will fit. If you currently have a stand attached to your LCD TV this is usually removed prior to fitting the wall mount and 4 holes should be revealed.
User Ratings and Reviews
5 Stars TILT SWING ARM WALL MOUNT FOR LCD/PLASMA TV & COMP.MONITOR
EXACTLY WHAT I NEEDED TO MOUNT A 20″ COMP. FLAT PANEL MONITOR IN MY RV.
DOUBLE SWING ARM AND TILT LETS YOU MOVE IT WHERE YOU NEED WHETHER IT’S TO WORK WITH OR TO SWING IT OUT OF THE WAY FOR STORAGE.
AND THE PRICE CAN’T BE BEAT ANYWHERE.
4 Stars Works well, but doesn’t fit all TVs
The swing arm is sturdy. It fits many standard screw patterns. It has worked flawlessly since I installed it. The plastic cover that goes over the metal was a pain and required some modifications to get it to work in my situation, but worked and looks nice.
Installing the swing arm into the wall turned out to be an adventure. There were no studs behind the wall where I wanted to mount it, and the screw mounts sent with the unit just pulled out once a little weight was applied. You can solve this two ways – use a bit of plywood that can be attached to wall studs, or use some large drywall screws that are used to hang plants and such. I used the drywall screws as I didn’t want to try and hide a hunk of plywood. I had to drill 3 good sized holes, but they are hidden behind the swingarm wall mount. It turned out sturdy and secure.
The one other issue I ran into was I ended up replacing the orginal TV I bought with the swingarm. The new TV advertised they were mounting VESA compliant and yes, the screws did match up – But the TV mount bracket covered up the cable TV connection. Out came the drill and a metal bit, and a few minutes later They cable ran right through the mounting bracket just fine. The lesson here is just because the screws line up (VESA Compliant) does NOT mean the TV will be easy to mount.
When you buy a flat screen to be mounted, look to be sure the cable connection and other important connectors are point down, to the side, or up – but NOT straight back.
The addition of a swingarm TV to the front office was a nice touch – much appreciated by my wife. This hardware gets a recommend – with caution on the mating of the right TV.
4 Stars GOOD QUALITY!
I have no room on my kitchen counter for a tv, so I looked into wall mounting, and this one gave me alot of options. I love it!
Peerless ST670P Tilt Wall Mount for 42 to 71 Displays Black
Peerless ST670P Tilt Wall Mount for 42 to 71 Displays Black
Versatile functionality and solid engineering makes this mount an intelligent choice for boardrooms, restaurants and bars or home theaters. SmartMount Universal Tilt Wall Mounts come with everything you need for a quick and easy install: flat panels engage with an audible click, simple to align universal brackets, 15-degree negative tilt gives unobstructed access to cables and an open-design wall plate allows easy access to junction boxes and cable management. Plus, the Peerless Sorted-For-You fastener pack eliminates guesswork during installation by making all the screen attachment hardware easy to find. Mounts to two or three wood studs, concrete, cinder block or metal studs (accessory required) Comes with Peerless’ Sorted-For-You fastener pack with all necessary screen attachment hardware included Dimensions – Unit Weight – 12.6 lb (5.7 kg) / Shipping weight – 14.95 lb (6.7 kg) / Maximum Load Capacity – 250 lb (113.4 kg)
User Ratings and Reviews
5 Stars Solid construction, spans 3 wall studs
Just wanted to note that this wall mount does just what it says and that it has the huge advantage of being wide enough to be mounted to 3 wall studs. That provides much better support for heavy flat panels AND allows for more precise mounting when the existing stud pattern is not optimal for 2-stud placement. Lastly, the mount’s adjustability is straightforward except that the rotating part that mounts on the panel was so tight, that I needed to use a long screwdriver to pry it and get it to move. Not a big deal once I realized that it was just stubborn and not ill-designed. Very sturdy.
5 Stars Great Universal Tilt Wall-Mount
Purchased this wall mount for my Pioneer 60″ plasma monitor. Holds this monitor with no problem. Tilt also works as described. Great product and customer support. Would recommend.
5 Stars Sturdy, easy to adjust
Fairly easy to install, included everything but drill bit. I spent a lot of time looking for a updated mounting for my TV, but it was old. I used a toothpick to measure depth and used a spacer. Don’t waste time with the chart.
Tilt allows adjustment to prevent glare from light overhead. I didn’t think I needed this, but is really needed.
With my TV Samsung 58″, I had 4″ of up/down adjustment.
Requires 2 people to safely tilt. For the safety of the giant sheet of glass, use both hands of 2 people and gently tilt, not twist.
Lot of room to slide sideways after releasing safety screws.
Safety screws are small compared to the rest of the mount, but still more than enough.
5 Stars Very Well Made Wall Mount, Somewhat Easy to Install
I purchased two of these mounts for a 50″ and a 60″ Pioneer monitor. The Peerless website was helpful to make sure I choose the correct wall mount model # for these particular monitors. I liked the feature to adjust the screen tilt anywhere between -5 degrees to +15 degrees.
The wall mounts were sturdy and very well made. All parts were neatly packaged and well labeled. The installation instructions were straightforward and relatively easy to follow. It took about 1 hour to install each mount, with most of that time spent on picking a good wall location, deciding on a good mounting height and finding the wall studs using an electronic stud finder. For the best results, make sure that you take the time to fasten the mount to the center of the wall studs and that the mount is perfectly level.
One issue came up that was not addressed in the installation manual. There are two parallel sliding tracks on each bracket that attaches to the TV/monitor. These sliding tracks are used to adjust the screen tilt. The instructions discuss a manual tension adjustment on one of these tracks using a built-in ratchet handle. The tension on the second track was too tight and needed to be adjusted but the instructions did not discuss this. I neded to use a 3mm hex head driver and a small wrench to make this adjustment.
One other minor issue is a reference in the instructions to a screen compatibility chart on the Peerless website that is out of date (June, 2006 was the last update).
Overall, I would recommend this product.
5 Stars Great Mount
Buy 1/4 x 4′ U bolts to mount this thing. I used 7 U bolts and I could hang King Kong off this thing in my drywall. I have a 58′ television and I have absolutely no worries of this television dropping. One flaw in this mount is gaining access to the back of the television once it’s hung. It’s minor though and not enough to draw back from a 5 star rating.
VideoSecu Adjustable Tilt TV Wall Mount for 37 60 Plasma TV LCD mount Flat Panel Screen black Bracket with Free 6 ft HDMI Cable MP501B M43
This heavy duty steel mount fits most 37″ to 60″ Plasma TV or LCD monitor. This Universal Flat Panel Mount offers quality, versatility and security for 37″ to 60″ Flat panel televisions. It features a high capacity and low profile design, lift-n-lock installation and adjustable tilt for optimal viewing. When you’re looking for a mounting solution for your flat panel television, don’t settle for anything but this world’s premier mounting products. And now available at the lowest price in the industry. Will This mount Fit my Plasma TV? First check the weight of your TV. It must be less than 165 lbs. Second, look at the back panel of your TV. If your TV has 4 holes or 6 holes on the back of the screen, measure the vertical and horizontal distance between the holes. If the vertical distance is within 2.95 inch to 18.5 inch, horizontal distance within 28 inch, then this bracket will fit. If you currently have a stand attached to your LCD TV this is usually removed prior to fitting the wall mount. Third, the width of your TV should be 32″ or above. Otherwise the mount is too wide to hide behind your TV. This mount does not fit VESA800×400. If you have a TV needing 800×400, please look at B000WXF7E4. Each mounts including a built in Bubble Level, and 6 ft high speed HDMI cable. $20 values for FREE! This mount is VideoSecu brand.
User Ratings and Reviews
5 Stars VideoSecu Adj. TV Wall Mount (37″-60″) Saves Lots
The Manufacture’s TV wall mount for their TV was major over priced and so after reading other reviews and the VideoSecu’s specs on their TV wall mount, I decided to go with them. Good choice since I was able to pay more than two hundred dollars less including shipping. This VideoSecu Adjustable TV mount is strong, easy to install and adjust…I’m well satisfied with this purchase…to all this I say…thank you…Ron K from TN.
5 Stars Don’t! buy a Bracket or Hdmi Cable at rip-off prices – BUY THIS
Great product, exactly as advertised and reviewed by others here. Easy to mount, clear instructions, nice tilt feature, built-in level eased installation, lots of useful hardware (lag bolts are cheesey, one broke off in the wall, I redrilled in a different spot and used another supplied lag bolt, my 42″ set weighs only 65 lbs, use caution and/or buy better bolts – don’t over tighten or over stress the lag bolts)
Bottom line, you could spend $200 in the store that sells you the TV or buy this for a fraction of the price. Highly Recommended.
5 Stars Can’t beat for the price, be sure to use hand tools…
In the sea of flat panel wall mounts, I feel we have a gem here. It’s just as nice as the more expensive units, but a fraction of the cost. The bonus of the included HDMI cable is just icing on this lovely cake. I read the reviews of this product before purchasing and found the general opinion to be that the mounting bolts would break if anyone attempted to put up the unit with them. This leads me to believe that they disobeyed the manufactures instructions stating not to use power tools. I installed mine with a wrench (instructions call for 7/16 but 13mm is what fit) and had no issues of any kind. The only point that I would criticize is that when securing the bottom bolts, unless the installer has a very long screwdriver, it will be difficult to properly secure it. But if that’s the most significant worry, it’s not a bad deal. Bottom line: Take your time with installation and you will love your purchase. Thank you for your time.
5 Stars Outstanding
This is an outstanding product at a reasonable price. It’s pretty straight forward installation. Shipped right away and arrived ahead of schedule!
5 Stars LCD WALL MOUNT
After looking in Best Buy for a wall mount at $129 I thought I would check out Amazon I found this mount and ordered it I could not be happier, it was so easy to mount my 10 year old could have done it.It came with all hardware all different size screws and bolts, mount even had a built in level to ensure straight and level and a 6ft HDMI cacble was include which best buy wanted $80
All for $39 with shipping has to be best deal out there shipping was fast got it in 2 days.I will never buy from a retail store again.
VideoSecu Wall Mount with Articulating Arm VESA200×200 200×100 Plasma TV LCD monitor swingout hinged arm 3K9
VideoSecu, an innovator of video mounts is the choice of professional installers and the brand most recommended by flat panel manufacturers. VideoSecu’s new Articulating mounts are a breakthrough in flat panel mount design, combining strength, easy installation, and striking product design that is unparalleled in the industry. They take maneuverability, stability and security to the extreme with a unique look that is sure to match your flat panel. The Articulating LCD Wall Arm supports most 22″ to 37″ LCD screens and up to 43 inch TV. It folds flat against the wall or extends out up to 15″. The two-link arm design provides easy one-touch tilt and up to 180 degrees of swivel for virtually limitless viewing positions. Fits most flat panel LCD TVs up to 42″. Will It Fit my LCD? Please check the weight of your TV or LCD, it must be less than 66 lbs. If your LCD Monitor or TV has 4 or 6 holes on the back of the screen, and they are either 50 x 50 mm (2″ x 2″), 75 x 75 mm (3 X 3″) or 100×100 mm (4″ x 4″), 200×100mm (8″ x 4 “), or 200×200 (8″ x 8″) apart from each other horizontally or vertically, this bracket will fit. If you currently have a stand attached to your LCD TV this is usually removed prior to fitting the wall mount and 4 holes should be revealed. If your TV has VESA 400×200 or 600×400, this mount does not fit. You need a mount with larger TV plate. Please make sure what mount your TV needs before you place order. If you are not sure, please send us a message. We will check for you.
User Ratings and Reviews
5 Stars Perfect wall mount for my 32 inch flatsreen
This wall mount is great. It is constructed very well and was easy to install. It looks clean and discreet on the wall and provides virtually 180 degree swivel for my 32 inch TV. It came with all needed hardware to mount to the wall including heavy duty wall anchors for the wall screws that did not hit a wall stud. The only complication was that I had to get the correct bolts for mounting the TV to the mount itself (the product did come with two different size bolts for this purpose but neither was the right size to mount the TV to the bracket). I found the correct bolts very easily at my local hardware store.
After hanging the TV (32 inch BestBuy Insignia – Approx 30 lb. with mounting holes 200 X 200) I am very confident my TV is secure and safe. In addition, the product is very well priced. Local stores wanted $100-$150 for similar mounts. WOW!
2 Stars to big
This product was very heavy and bulky we only wanted it for a smaller tv it would proberbly work ok for large tvs but did not work for us and we returned it
5 Stars Great Solution For Our Large TV
We are very pleased with this product. Using the wall mount allowed us to put our tv on a wall that we otherwise would have needed to get a piece of furniture that went in a corner and would have been taller than a partial wall that would have shown the back of the furniture. It sits nicely against the wall and the articulating arm works smoothly. Great price, too!
4 Stars Good product but needs better screws!
Very compact product. When it arrived I thought it was a DVD player that I had ordered. The packaging was small. We bought it for our 32 inch lcd tv. It fits the television perfect and is a strong product. Very Sturdy(not flimsy at all). The only complaint that I have is with the screws. The screws were very short and did not have enough length to connect the mount to the TV. Thank God my husband is a carpenter because he was able to use some other longer screws. He also complained that the walls had to be double studded or you would have to use a wood plate to mount the bracket to the wall. He was able to mount one side to a stud but he had to use the cheap anchors for the other side. However, the mount had excellent stability and the TV is doing just great mounted on the wall!Reasonable Product, as long as you can make minor modifications, this is a good deal!
5 Stars Great quality and price
Very sturdy design, great price. Easily mounted into brick wall. Received it 4 days after ordering. Used with a 26 inch TV.
Sabrent TV LCDHR High Resolution 1680×1050 TV Tuner Box with Picture in Picture for LCD CRT TFT and Plasma Monitor Projectors
Let your monitor do double-duty! This small sleek box can let you watch TV on your CRT/LCD or any VGA Monitors. Enjoy high-quality viewing pleasure with this external TV Box. It allows you to watch TV, or other video devices on your monitor. Advanced video processor delivers outstanding video quality that surpasses your home TV ! As LCD monitors become more popular and their prices drop drastically, it is the best economical alternative to the expensive LCD TVs. Think about making the most use of your pc monitor in the meantime! This evolutional TV Tuner box allows you to experience full-screen, high-resolution video entertainment without your desktop. With a built-in TV tuner and various video connections for additional bonus such as a VCD, VCR, DVD, or PS2/X-Box, you will be able to view multi-programs or go wild of the gaming. This TV tuner box perfectly matches with LCD/CRT/TFT & Plasma monitor! Simply plug it into a CRT or LCD monitor, without the need of a computer and you can enjoy watching TV shows right away. Supports resolution up to 1680 x 1050. Support all LCD/CRT monitors. Plug-N-Play, no software & driver required. 3D motion adaptive deinterlace. Sleep function (Auto turn-off). Fully functional infra-red remote control
The Sabrent TV LCDHR High Resolution TV Tuner Box supports resolution up to 1680 x 1050 and supports all LCD/CRT monitors. It is also quick to install as easy as plug and play with no software and driver required. It has a 3D motion adaptive deinterlace capability and a built-in fully functional infra-red remote control. The Sabrent TV LCDHR High Resolution TV Tuner Box has dimensions of 9.6 x 7.3 x 2 inches and weighs about 1.2 pounds.
User Ratings and Reviews
1 Star Low quality
Image quality is ok for watching VHS movies, but even normal DVDs look poor through this device. Fuzzy and blocky images. DVDs look like an old VHS through this device. On a positive note, it is easy to use.
1 Star Very bad quality…!
This product isa mess, this functions in display won’t work properly and the image is not good, don’t buy it even under 10 bucks !
1 Star It’s the thought that counts…
While I was eager to try it, and the price was good… the first one failed to work altogether out of the box, and the 2nd failed after a week. I love small Chinese companies for their willingess to try and impersonate big corporate products… but the results is always the same. Poor quality and utter failure to deliver as the more illustrious counterparts. Maybe some day small chinese electronics will actually all work, but until then I’d recommend finding a VCR or DVDR– spend the money for a tuner that works if you need one 
or a graphics card that has S-video or some other output that works with your tuner-less monitor.
1 Star Yankeyboy
I couldn’t make this tuner work. There were no directions included but it seemed pretty straight forward. I wrote the manufacturer they were no help at all. I hooked it up to a CRT monitor, it scanned for about 20 minutes and found 3 stations I think. My Tv gets six and my Tv converter box gets 26 with the same antenna. It’s hard to tell since none were clear enough to watch. The sound was terrible. The reception was like UHF with no UHF antenna. While at the same time in the same spot my antenna reception for both my Tv and my converter box is excellent. When I wrote to the seller they answered and agreed to take it back. They also educated me to the difference between ATSC-non-digital broadcast, which this device is, and NTSC which is digital. I’m astonished they are still marketing a product that will be obsolete in a matter of weeks. Beware!
4 Stars Nice little gadget
Functional and small. I like this little gadget. The video-out port is kind of tight so the connector will fall out if you don’t insert it right, otherwise a good item for the money.
