Posts Tagged ‘Mounting Bracket’
OmniMount UCLX P Articulating Wall Mount for 42 to 63 Displays Silver
OmniMount UCLX P Articulating Wall Mount for 42 to 63 Displays Silver
The CL-X offers a dual-arm configuration with a dual-stud mounting bracket for added strength and reliability. A double-capacity cable management system allows for twice as many unsightly wires to be neatly tucked away within the cantilever’s housing for a clean, organized look. This combo includes the UAL universal adapter plate. Easy installation Fits 42 to 63 Flat panel TV Holds up to 200 lb. (90.7kg) maximum weight Double stud mounting Profile from wall – 6.2
User Ratings and Reviews
5 Stars Great Mount
I purchased this mount for use with my 42″ Samsung LCD tv about six months ago. Overall, I really like the versatility of this mount with the ability to swing a full 180 degrees as well as tilt. Moving the unit away/toward the wall takes a bit more effort than I would have expected, but can be accomplished with one person. The biggest difference I’ve noticed compared to the tilt-only mount I replaced is that the unit sticks out a bit more from the wall when pushed back fully flush. I guess this is to be expected given the two arms and all, but it didn’t occur to me when I bought the mount. Installation went smoothly, but is easier with two people. Also, unless you have a full set of drill bits, plan on buying a large bit to drill pilot holes for the wall anchor bolts, as they are quite large. Although this unit is pricey, in hindsight I wish I had purchased it when I purchased the television because this mount is much more versatile then the basic-tilt models that run between $100-$200.
4 Stars Cuts out a lot of hassle.
I bought this mount a year ago roughly. I had 2 prior to it that were much cheaper, but in the long run ended up being more expensive due to time investment and hassle.
I had one small issue with it where the television bracket wasn’t tight enough and caused rotation once it was hung, fixed it by tightening up and have had no issues since.
It holds my TV without sagging even at full extension, I appreciate a product that does what it says it can.
I took off one star because of the price and the issue with the rotation, if it had been much more loose it could have caused injury or damage and never mentions this being a source of adjustment.
5 Stars Built like a tank!
I bought this mount last year to hang a 47″ LCD in our bedroom. The wall I installed the mount on had 2 studs running down the middle, so the mount installation was fairly simple. There isn’t too much adjustment/wiggle room left to right with this mount, so wall placement could be somewhat of an issue depending on stud location, but other than that, the mount is a work of art, and solid as a rock. Been using it for over a year, and really like the quality. I can pull the TV out from the wall quite a ways when working on wiring, and the mount handles the TV weight with ease.
5 Stars Awesome
This product is nearly perfect. I downloaded the instructions and reviewed them before I purchasd the item so I knew what I was getting into. I ordered the UCL-XP instead of the UCL-XB thinking that was the black one. I actually like the Platinum color better. The last digit in the model number denotes color. I put the unit up in less than a couple of hours including breaks. The template lays out the mounting positioning very well, deciding how high I needed to place this mount took about as long as putting it up. Leveling is very important, although you do have a little play either way. I placed the mount near a corner for total room viewing and it does not disappoint. At this time I have not used the built-in cable runs so I cannot comment on their usefulness, Im still trying different hookups on the back of the TV. This unit looks gorgeous and my 50″ plasma seems to float in the air. If I ever upgrade to a larger flat panel, this mount will handle it no problem.
5 Stars Wonderful
This is definitely not a do-it-yourself installation, however if you’ve been impatiently waiting to mount your beast of a television on copious amounts of steel and are really excited to start drilling, then this can be a one man job. I received the product, which arrives in an enormous box, with a set of instructions in more languages the the United Nations could even comprehend. However, the install was acutally fairly uneventful and reasonably facile. If you’re mounting to steel beams, then beware, because most likely you will need washers, as the bolts provided have threads which stop about 1.5 cm from the top.
When it comes time to mount the television, and you’re feeling like Lou Ferrigno circa 1978, then you’ll be able to lift that LCD (probably not a plasma) up onto the bolts and BAM!!! You’re done. Overall, easy install, great looking product and perfect for those situations when a table top tv is so last season.
Sanus MT25 S1 Tilt Wall Mount for 26 to 42 Displays Silver
Sanus MT25 S1 Tilt Wall Mount for 26 to 42 Displays Silver
Tilt Mount For Flat TV’s / Supports Flat-panel Widescreen Televisions weighing up to 100 lbs / VESA 50, VESA 70, VESA 100, VESA 200, VESA 400 / Silver Safety clip locks mount securely in place on wall Compatible with VESA 50, VESA 70, VESA 100, VESA 200, VESA 400 Dimensions (WxDxH) – 14-1/2 x 2-1/2 x 11-1/4 inches
User Ratings and Reviews
5 Stars great mount
this mount was simple to install, highly recommend. tilts up and down, not left and right.
5 Stars Great product
Wow, I’ve seen the same make sold elsewhere for more than double the price. This was so easy to set up and get on the wall even a cave man could do it! Would recommend this mounting bracket to anyone thinking about putting their flat screen on the wall. We are really pleased with the result and since it was so easy the down side is why didn’t we do this sooner!
5 Stars Tilt Wall Mount for 26″ to 42″ Displays (Silver)
Fast shipping, one forth the price of what I would have paid
at best buy….great quality. Am very happy with purchase.
5 Stars Easy to install, good price
After finding the stud location, this mount took us only 10 minutes to install. Instruction is clear and simple. Mount is small and tilts well, a very good fit for LCD TV smaller than 40 inch.
CHEETAH MOUNTS LCD TV MONITOR TILT OR SWIVEL WALL MOUNT VESA 100 BLACK
CHEETAH MOUNTS LCD TV MONITOR TILT OR SWIVEL WALL MOUNT VESA 100 BLACK
This mount holds your display only 3″ from the wall yet allows for either 30 degrees of up and down tilt or 30 degrees of side to side swivel. The two X-shaped arm pieces rotate like the face of a clock a full 360 degrees. This allows you to change your display from landscape to portrait orientation. The two screw mounting holes are recessed for a clean look. Fits VESA 50, 75, and 100 hole patterns and up to 15-24″ displays weighing up to 33lbs. Installation instructions and all hardware are included.
User Ratings and Reviews
5 Stars Inexpensive and easy to install
This TV mount is a great value and easy to install-perfect for the 19″ LCD.
5 Stars simple and works great
I installed this product tonight to hold my 20″ LCD monitor. Installation was simple and the product works great. The best part is that you don’t have to install the mounting bracket to the wall perfectly straight, because you can rotate the monitor back to level after you’re done. It also comes with lots of different size screw sets so you don’t have to worry about finding screws for your specific monitor. I’d recommend it to others and would buy it again.
5 Stars Works great!
Very solid mounts! It was a little stiff at first, but that wasn’t a big deal. I installed it so that it would tilt left/right instead of up/down. I highly recommend!
4 Stars Cheetah monitor mount
Pros: All metal, very sturdy construction/design.
Cons: None
Other thoughts: Holds my Samsung 22 inch wide lcd monitor just fine. Takes two people to actually mount a large monitor, one to hold the monitor the other to tighten the screws. Came with a whole bunch of screws for various size screw holes for different brands of monitors. Plus large screws to bolt it to a wall stud and large plastic anchors if you don’t mount to a stud. The pictures don’t show it but there is a mounting plate that bolts to the wall first then the part that you do see in the pictures bolts to the wall plate (the wall plate fits inside the mount). I plan on getting another one of these mounts for my next system build, just can’t beat the price for the quality.
Sanus Systems Adapter Plate for Vesa 200
Sanus Systems Adapter Plate for Vesa 200
Converts VESA 100 Monitor Mount to fit onto VESA 200 Assembly hardware included Top Shelf Width – 38 / 96.52 cm Top Shelf Depth – 21 / 53.34 cm Top Shelf Capacity – 75 lb / 34.09 kg Bottom Shelf Width – 38 / 96.52 cm Bottom Shelf Depth – 21 / 53.34 cm Bottom Shelf Capacity – 75 lb / 34.09 kg Product Width – 38.4 / 97.54 cm Product Height – 24.5 / 62.23 cm Product Depth – 38.9 / 98.81 cm
User Ratings and Reviews
5 Stars Sanus System Adapter Plate
Included all hardware and easy to understand instructions.
Excellent fix for the problem that it was designed to address.
It’s a shame that they don’t tell you that you may need this adapter when you purchase the wall mount. I found out only after some investigation.
5 Stars Exactly what I needed. Great!
Exactly what I needed. As strong as the main bracket. Glad I found this product. Just wish they had this in black.
5 Stars You might need this
I recently had to replace a 26″ wall mounted HD television. I thought it would be a snap. Take down the old one and move the mounting bracket to the new on. NOT SO FAST. The original TV had VESA compliant mounting screws and they were in a pattern of 100mm x 100mm. Upon unpacking the replacement TV (Toshiba) I found that while VESA compliant the mounting screws were now in a 100mm x 200mm pattern. A little searching while google and I found this Sanus Systems adapter place. A few days after ordering this I had what I needed to get the new TV up on the wall were it belonged. Hope this helps someone else with this situation.
5 Stars Works as advertised
Easy to attach to both the TV and the support arm. Too bad that Sony requires this at all!
4 Stars No 75mm holes
A couple of points: There are no 75mm holes, so when mounting to an adjustable arm, you may have to use the plate which changes the mounting arm from 75mm to 100mm, then attach this adapter as well. This adapter may be a little oversized if installing on a monitor with a recessed, or flush mount bracket. Due to this, the supply screws weren’t deep enough to me use. I had to go to the hardware store and get ones with the right depth. Used on Samsung Syncmaster 245BW and Ergotron LX Desk Mount.
13 To 27 Tilt and Pan LCD Mount
13 To 27 Tilt and Pan LCD Mount
EasyMount 13 to 27 Tilt and Pan LCD Mount
User Ratings and Reviews
1 Star Cluster Bomb
Not at all what I ordered, nor even what I recieved.
I ordered a FULL MOTION wall mount and recieved one similar to this, NOT THIS ONE.
My account is telling me I ordered this one, but I did not.
If I ordered this one and its not sold buy Amazon LLC, then how did I get free shipping?
Sent an email to customer service 16 hours ago and they said it would be 12….have yet to hear anything.
I know I got very close to what I remember ordering, because it has the same logo, and the box clearly says “fits up to 30 inch screens,” and this listing is only rated for up to 27″.
Here is the one I ordered:
Level Mount DC30SJ Full Motion Mount Fits 10-Inch to 30-Inch Televisions (Black)
The one I recieved is the same brand, just no swing arm. My desk is in a corner and I NEED that part.
BEWARE WHEN ORDERING WALL MOUNTS HERE!
5 Stars Perfect choice for a low price!
This wall mounting bracket is simply wonderful – easy to install, comes with everything you need to install it (even with stud detector) and it is a matter of minutes to fix your LCD. Highly recommended!!!
2 Stars flat flat flat
This mount is very very flat. Your lcd will be very close to the wall. You can get two extension arms from the manufacturer, but those cost about $8 each, and they are only about 3″ long, so with both of them you’ll still only be about 6″ off the wall.
If you’re looking for a close-to-the-wall mount, this is a fine model, and it has a built-in level. Easy to install. If you want something that comes forward a bit (like to reach a nice spot on your desk from the wall) you’ll want something larger.
3 Stars Good product… A little cumbersome
I have this mouting a TV in our kitchen. I wish it would sit more flush against the wall. Also, it’s a little awkword to reach behind and turn the tilt knob. Ohther than that, I’m pretty happy with it.
5 Stars Very Pleased
Very happy with my purchase. Timely delivery and the product was just as described. Everything was included to mount my LCD TV easily.
