Posts Tagged ‘Monitor Mount’
CHEETAH MOUNTS LCD TV MONITOR TILT OR SWIVEL WALL MOUNT VESA 100 BLACK
CHEETAH MOUNTS LCD TV MONITOR TILT OR SWIVEL WALL MOUNT VESA 100 BLACK
This mount holds your display only 3″ from the wall yet allows for either 30 degrees of up and down tilt or 30 degrees of side to side swivel. The two X-shaped arm pieces rotate like the face of a clock a full 360 degrees. This allows you to change your display from landscape to portrait orientation. The two screw mounting holes are recessed for a clean look. Fits VESA 50, 75, and 100 hole patterns and up to 15-24″ displays weighing up to 33lbs. Installation instructions and all hardware are included.
User Ratings and Reviews
5 Stars Inexpensive and easy to install
This TV mount is a great value and easy to install-perfect for the 19″ LCD.
5 Stars simple and works great
I installed this product tonight to hold my 20″ LCD monitor. Installation was simple and the product works great. The best part is that you don’t have to install the mounting bracket to the wall perfectly straight, because you can rotate the monitor back to level after you’re done. It also comes with lots of different size screw sets so you don’t have to worry about finding screws for your specific monitor. I’d recommend it to others and would buy it again.
5 Stars Works great!
Very solid mounts! It was a little stiff at first, but that wasn’t a big deal. I installed it so that it would tilt left/right instead of up/down. I highly recommend!
4 Stars Cheetah monitor mount
Pros: All metal, very sturdy construction/design.
Cons: None
Other thoughts: Holds my Samsung 22 inch wide lcd monitor just fine. Takes two people to actually mount a large monitor, one to hold the monitor the other to tighten the screws. Came with a whole bunch of screws for various size screw holes for different brands of monitors. Plus large screws to bolt it to a wall stud and large plastic anchors if you don’t mount to a stud. The pictures don’t show it but there is a mounting plate that bolts to the wall first then the part that you do see in the pictures bolts to the wall plate (the wall plate fits inside the mount). I plan on getting another one of these mounts for my next system build, just can’t beat the price for the quality.
Sanus Systems Adapter Plate for Vesa 200
Sanus Systems Adapter Plate for Vesa 200
Converts VESA 100 Monitor Mount to fit onto VESA 200 Assembly hardware included Top Shelf Width – 38 / 96.52 cm Top Shelf Depth – 21 / 53.34 cm Top Shelf Capacity – 75 lb / 34.09 kg Bottom Shelf Width – 38 / 96.52 cm Bottom Shelf Depth – 21 / 53.34 cm Bottom Shelf Capacity – 75 lb / 34.09 kg Product Width – 38.4 / 97.54 cm Product Height – 24.5 / 62.23 cm Product Depth – 38.9 / 98.81 cm
User Ratings and Reviews
5 Stars Sanus System Adapter Plate
Included all hardware and easy to understand instructions.
Excellent fix for the problem that it was designed to address.
It’s a shame that they don’t tell you that you may need this adapter when you purchase the wall mount. I found out only after some investigation.
5 Stars Exactly what I needed. Great!
Exactly what I needed. As strong as the main bracket. Glad I found this product. Just wish they had this in black.
5 Stars You might need this
I recently had to replace a 26″ wall mounted HD television. I thought it would be a snap. Take down the old one and move the mounting bracket to the new on. NOT SO FAST. The original TV had VESA compliant mounting screws and they were in a pattern of 100mm x 100mm. Upon unpacking the replacement TV (Toshiba) I found that while VESA compliant the mounting screws were now in a 100mm x 200mm pattern. A little searching while google and I found this Sanus Systems adapter place. A few days after ordering this I had what I needed to get the new TV up on the wall were it belonged. Hope this helps someone else with this situation.
5 Stars Works as advertised
Easy to attach to both the TV and the support arm. Too bad that Sony requires this at all!
4 Stars No 75mm holes
A couple of points: There are no 75mm holes, so when mounting to an adjustable arm, you may have to use the plate which changes the mounting arm from 75mm to 100mm, then attach this adapter as well. This adapter may be a little oversized if installing on a monitor with a recessed, or flush mount bracket. Due to this, the supply screws weren’t deep enough to me use. I had to go to the hardware store and get ones with the right depth. Used on Samsung Syncmaster 245BW and Ergotron LX Desk Mount.
